Home Tweakers' Asylum

Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ.

RE: That aspect should be open for discussion...

Heck, I recently found debates between you and me, back in 1993, from this website...

Uh, John, this website didn't exist in 1993.

In 1993, we were on The Audiophile Network.

Here's a little sample:

Msg#:13792 *Audio Hardware*
01-22-93 23:51:24
From: JOHN CURL
To: MATT SPITZER
Subj: REPLY TO MSG# 13665 (HEAD AMP)
Matt, I would first try to add a load resistor to the phono input, before
making any rash judgements. Try a 100 ohm metal film resistor on each phono
input. You only need more gain if your volume control is at maximum or the
noise from the phono stage is just too much. Don't let anyone tell you
anything different. If you need more gain, I would recommend a transformer
made for MC cartridges. This will improve the signal to noise of the phono
stage, yet not add a transistor sound to your phono input.


se





This post is made possible by the generous support of people like you and our sponsors:
  Schiit Audio  


Follow Ups Full Thread
Follow Ups
  • RE: That aspect should be open for discussion... - Steve Eddy 16:46:45 02/10/11 (0)

FAQ

Post a Message!

Forgot Password?
Moniker (Username):
Password (Optional):
  Remember my Moniker & Password  (What's this?)    Eat Me
E-Mail (Optional):
Subject:
Message:   (Posts are subject to Content Rules)
Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:  Automagically notify you when someone responds.