|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: RE: DIY cable - scratchy posted by Jerico on January 8, 2011 at 05:48:22:
With that construction I would think they would be pretty good at noise rejection. As a test you might try wrapping them in Aluminum foil to see if the problem goes away. The foil creates it's own problems so I wouldn't recommend leaving it.
Another thing to try is a bare wire (a thin gage will work fine) woven into your cable, tied ....AT ONE END ONLY... to earth ground. The screw holding the faceplate to the wall outlet should be grounded so use a crimp lug to get under it.
Edits: 01/08/11
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: DIY cable - scratchy - Uncle Mike 06:16:04 01/08/11 (1)
- RE: DIY cable - scratchy - Jerico 14:05:19 01/12/11 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
