|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: RE: Another Very Cheap Tweek posted by ABliss on March 9, 2009 at 10:42:38:
The exact glue I use is DAP Weldwood Contact Cement.
This stuff is very sticky. Before using u must wash the deflex completely with a hot water and mild dish detergenet to take out any oils from the panels and then make sure it is air dried completely.
Then the Deflex will feel tacky and somewhat sticky this way.
It says on the small one ounce bottle I bought that this stuff bonds on contact.
Use on wood,rubber,leather hundreds of items, and that its a durable water resistant bond.
If it still doesn't stick then I will apply to the surface I'm trying to stick it on as well.
The stuff is kinda messy But really works, But make sure that once u stick it on the wood don't move it at all or it will loose the good tight bond on the wood.On the bootom top I took a piece and ran it from the top side about 3 inches down the side and ran the other piece right to the opposite edge corner and it created a nice seal for me that way.
Well good luck. This Stuff Is great and I think although somewhat expensive this has been by far the most significant tweak I have ever done in 30 years.
Don c.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Another Very Cheap Tweek - tbone76doublebass 11:01:39 03/09/09 (1)
- RE: Another Very Cheap Tweek - ABliss 20:02:31 03/09/09 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
