|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: RE: Crossover capacitors posted by The Real Dick Hertz on November 19, 2007 at 15:41:36:
I bought a bunch of these last month from this seller and they sound better in my 3rd order BW, 1600 Hz crossover than Solens, Auricaps, or Mundorf Supremes. There's a clarity to good oil caps in large values you don't get with foil IMHO. And they're cheap, like me.
The resistors should be non-inductive. Do they look like blocks of cement? You should be able to measure them in the circuit, if not, just lift one end of the pair.A good substitution are Mills Wirewounds. Be sure to get an equal or higher watt rating.
That's a Kimber lurking under the board for the attenuation circuit. Very nice in small values.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Crossover capacitors - Square Peg 16:22:43 11/19/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
