|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Re: Power consumption roughly 2.5 times the total output power posted by Craiger56 on April 21, 2007 at 13:11:20:
In real life, here are the specs for a pure class-A 150W/channel amp ...Technical Specification
Input Sensitivity 1.6v for full rated output
input Impedance 67 kohms
Slew rate up to 40v/us
Power supply at 4 ohms up to 16 amps
Instantaneous current supply up to 75 amps
Signal to noise ratio < 100dB
Power Consumption (idle) 175watts
Power Consumption (full rated power @ 8ohms) 720 watts
Power Output 20hz - 20Khz @8ohms 150 watts RMS per channel (both channels driven)
Weight 40Kgs
Dimensions 480 x 480 x 225mm
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Common misconception - Slider 13:36:01 04/21/07 (6)
- Re: Common misconception - Craiger56 15:02:00 04/21/07 (5)
- What is pure class A - Slider 17:04:03 04/21/07 (3)
- Re: What is pure class A - Craiger56 18:36:41 04/21/07 (2)
- not necessarily wrong ... - Slider 19:14:46 04/21/07 (1)
- Re: not necessarily wrong ... - beermanpete@socal.rr.com 23:39:40 04/21/07 (0)
- Re: Common misconception - clifff 15:47:39 04/21/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
