|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Re: Hammond choke 193L installation for dummies? posted by audionutge@yahoo.com on April 23, 2007 at 14:14:48:
Hi Alan,The chokes are rated at a particular DC current because their inductance will be higher at lower currents and lower at higher currents. See the link.
The choke used as an AC filter will draw slightly less than 64 mA because it has no DC current. However, this does not affect its observed performance.
I expect you are getting improved performance from the 193M because of the higher Ohmic resistance of the winding. Two of them in series should work better.
Al
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Clarification: the current rating is DC to achieve rated inductance. - Al Sekela 15:19:19 04/23/07 (1)
- Re: Clarification: the current rating is DC to achieve rated inductance. - audionutge@yahoo.com 15:41:05 04/23/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
