|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Cardas Tri Eutectic Solder help posted by Analogtheo on April 15, 2007 at 08:52:30:
Lead free solder does not result in a shiny solder joint. It will always be a bit gray and dull compared to a good leaded solder joint. Lead free solders do not wet (flow) as well as leaded solders. I use a similar tin/silver/copper solder alloy and it works ok. It is more important with lead free solders to be sure that the parts to be soldered are cleaned and free of oxides. Old parts or wire must be scraped clean with a blade or wire brush to improve solderability.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Cardas Tri Eutectic Solder help - beermanpete@socal.rr.com 23:31:47 04/17/07 (3)
- Re: Cardas Tri Eutectic Solder help - Analogtheo 08:32:03 04/18/07 (2)
- Re: Cardas Tri Eutectic Solder help - beermanpete@socal.rr.com 20:39:14 04/18/07 (1)
- Re: Cardas Tri Eutectic Solder help - Analogtheo 00:36:16 04/19/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
