Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ.

---

[ Follow Ups ] Thread: [ Display  All  Email ] [ Tweakers' Asylum ]

---

[ Alert Moderator ]

---

Re: ...and speaking of oyaide

Posted by kenster (A) on April 3, 2007 at 14:12:35

In Reply to: Re: ...and speaking of oyaide posted by some young guy on April 3, 2007 at 13:22:20:

"i'll try your suggestion of moving the isoclean to the floor, but i'm wondering what i may hope to gain from this."

With the Isoclean sitting on a shelf of your rack, it is going to modulated by the vibrations that are imparted on the shelf.

I am going to assume U have a cement floor under the carpet and if so, excellent. Make sure the Isoclean has firm contact via all 4 spikes thru to the cement floor. It should feel "solid" without any rocking motion and U may want to add additional weight to the top of the unit.

A little trick I use is to punch a hole in the carpet/padding with a phillips screw driver where the spikes will penetrate. This makes firm contact ALOT easier.....just don't do it when your significant other is around!!

"i'm not sure what you're getting at there."

Anytime there is a connection made via plugs/outlets, resolution is lost no matter how good the plugs/outlets are and with the Isoclean on the rack shelf, alot of resolution is being lost due to the observation sited above.

Try those tweaks and report back.

Cheers,

~kenster

This post is made possible by the generous support of people like you and our sponsors:

VH Audio

---

[ Top of Page ] [ Contact Us ] [ Support/Wish List ] [ Copyright © 2024, Audio Asylum, all rights reserved ]

---

[ General ] [ Speakers ] [ Tubes ] [ Vinyl ] [ Digital ] [ Hi-Rez ] [ Video Asylum ] [ Cables ] [ Tweaks/DIY ] [ Music ] [ Films ]

---