|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Re: Magnan AC filter tweak posted by cporada@cabnr.unr.edu on March 26, 2007 at 12:47:04:
ChrisA single .47uf and .01uf bypass if the min amount for this filter project. You can fine tune the filter by increasing the number of bypass caps. When I make the filter I use the older 40uf model using two 20uf caps. I use two bypasses to support the main caps. The additional bypass caps open up the mids and top end detail.
Good luck finding 10uf x-caps....so if you decide to use polypropelene metallized caps make sure you keep the voltage at around 600v for safety and only use caps that have been tested. I have seen a lot of caps at 600v heat up and smoke after a few days...so be careful.
Alan
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Magnan AC filter tweak - audionutge@yahoo.com 23:05:56 03/26/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
