|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Re: Ceramic cap, signal to ground - ? posted by reuben on March 19, 2007 at 09:19:41:
Hi.Like quite few brandname phono & power amps used ceramic caps, I used them too in my tube & SS phonostages & power amps, but only HV grade (3KV) for I/P jacket HF decouple grounding.
Low voltage rated ceramic caps are not linear at all but only HV rated are pretty linear.
c-J
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- I used HV ceramic caps too. - cheap-Jack 11:02:23 03/19/07 (1)
- Re: I used HV ceramic caps too. - reuben 09:02:47 03/21/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
