Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
I'm playing with the phono board in an old HK receiver. As the phono signal enters the board, it gets coupled to ground via a tiny ceramic cap (one each for left and right).Would like to hear the inmates' thinking -- ss that a case where the ceramic introduces distortion and I should replace with a film cap?
Thanks,
Steve.
This post is made possible by the generous support of people like you and our sponsors:
Topic - Ceramic cap, signal to ground - ? - Ecaroh 15:41:27 03/18/07 (5)
- AC coupling caps a fairly safe bet for upgrades but these HF shunts and bypass caps may be another story... - Ugly 13:59:02 03/19/07 (0)
- Re: Ceramic cap, signal to ground - ? - reuben 09:19:41 03/19/07 (2)
- I used HV ceramic caps too. - cheap-Jack 11:02:23 03/19/07 (1)
- Re: I used HV ceramic caps too. - reuben 09:02:47 03/21/07 (0)
- Really? - cheap-Jack 07:49:32 03/19/07 (0)