|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Platforms -ON- components posted by RickeyM on February 17, 2007 at 18:26:15:
Picture a sumo wrestler on a trampoline. Now picture the vibration modes of a heavy power transformer mounted on a chassis bottom plate that is supported only at the corners and edges.The resonant frequency of such a device will be in the mid-bass or lower, and stiffening by placing the bottom plate directly into contact with a thick cutting board will improve the bass clarity. I use sheets of Deflex rubber between the component and cutting board, to prevent chatter and to dampen the remaining vibrations. Deflex rubber sheets are available from partsconneXion.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Yes, especially components with 'trampoline' modes. - Al Sekela 09:03:59 02/19/07 (2)
- Re: Yes, especially components with 'trampoline' modes. - RickeyM 19:10:52 02/19/07 (1)
- I use DIY roller-ball suspensions - Al Sekela 14:46:22 02/20/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
