|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Hardwood floor over concrete - any role for ampstands? posted by Tympani on February 10, 2007 at 13:32:19:
If your speakers are solidly connected to the floor (spikes etc) then the hardwood will transmit vibration.
I would suggest trying to isolate at one end of this (amp) or the other (speakers).
You might find that the airspace under the wood (I am assuming the wood is fixed to batons which are fixed to the concrete) is a sound bos emphasising certain frequencies.
Of course all system/environment situations are different and its somewhat unpredictable.
But experimentation may throw up a winner.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- possibly - dave c 13:39:47 02/10/07 (2)
- Wood glued to concrete. - Tympani 20:00:53 02/10/07 (1)
- Re: Wood glued to concrete. - dave c 12:26:09 02/11/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
