|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Suggestions for Mirage BPS-100 subwoofer driver posted by mokus on January 14, 2007 at 06:19:29:
Without any technical data for the drivers, one cannot really recommend any enclosure volume, port tuning if a vented design is used, or much else.I know the BPS-100 was a bipolar sub and was a respectable sub at that.
If it were me with those drivers, I would contact API and see if they would release the drivers technical data. If they will, your well on your way and U would then need to build, or have one built, a suitable cabinet for the drivers.
If not, I would use them in an isobaric configuration in a 2.0 cubic foot well braced enclosure with one of the plate amps U listed.
I have included a link that explains isobaric loading.
Cheers and good luck,
~kenster
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Suggestions for Mirage BPS-100 subwoofer driver - kenster 16:51:01 01/14/07 (2)
- Re: Suggestions for Mirage BPS-100 subwoofer driver - mokus 20:59:05 01/15/07 (1)
- Re: Suggestions for Mirage BPS-100 subwoofer driver - kenster 03:27:03 01/16/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
