|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: pros and cons on using resistors for speaker/amp matching ? posted by snkby on January 9, 2007 at 22:49:49:
If so, I'd put 3 drivers in series for 12 ohms and then wire those together in parallel for a 6 ohm load.I trust you understand the drivers will only be 4 ohms at a certain frequency. Most of the time they will be above 4 ohms.
Russ
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- All are six drivers identical? - Russ57 03:47:47 01/10/07 (1)
- hey russ57 ! yes all drivers are identical but - snkby 08:31:06 01/10/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
