|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Hex Fred diodes help..... posted by ABliss on December 31, 2006 at 11:12:47:
If they are a TO-220 style then I think I can answer. They don't need to be mounted but there is provision to attach them to a heatsink. I use the slip on style heatsinks. The legs can be bent and soldered into the board. I use a clip on heatsink to help dissipate the heat to the body of the diode when soldering. Diodes are directional devices and you must orient them correctly. Most multimeter's have provision to check diodes.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Hex Fred diodes help..... - Mike B. 11:59:13 12/31/06 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
