|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Re: Where to get Elna Silmic caps? posted by Carlos on April 3, 2005 at 18:21:43:
Thanks!Actually, I figured the Goudreau triple is intended for bypasses at digital ICs, not opamps. Those SMD ceramics will do wonders in cleaning the digital PS rails of hash above 1MHz up to over 100MHz.
I currently have Oscon SPs bypassing the PS rails of all opamps, in CDP, preamp, and phono stage. They're a bit hard, but wonderfully detailed and dynamic. I'm now thinking that I might just replace them with the newer Oscon SEPs or SEPCs that have about half the ESR and better behavior on audio frequencies.
In addition, I have small ceramics guaranteeing the stability of the opamps, but based on Thorsten's earlier postings here, I'm going to replace them with Epcos film caps.
The main power supply caps are Nichicon FGs or KZs, the latter in the phono stage, but after the regulators, all electrolytics are currently Oscons.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Where to get Elna Silmic caps? - Sampsa 18:44:03 04/03/05 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
