|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Re: Ferrite/plug test results posted by Mike Bates on June 18, 2000 at 07:46:40:
Mike I'm sorry I didn't get back to you sooner but its happy pop's day and I spent the day with the kids.Try two things. First step down to 18ga. lamp cord. Next don't use so many loops. In both of my designs (18ga. and 16ga.) I use 4 loops layer on top of one another. Now once you have it plugged in adjust the tension of the loops. Using the AQ Stopper in this design layout the frequency is very audible in the 1KHz range. This is usually good guide to smooth out and blend the effectiveness better with your system.
Hope this helped...
APM
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Ferrite/plug test results - APM 21:46:18 06/18/00 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
