|
Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
|
|
Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
In Reply to: 13E1 posted by OLLY on September 26, 2002 at 04:12:14:
he has some experience with the 12E1 and since you have two, PP comes to mind. But anyway, treat it like any other triode strapped tetrode, keep voltage down to something like 400 and assume high miller/input capacitance. Rp should be something like 3-500 Ohm with mu of 7-10. Drive it well, maybe with a 6BL7, or better still a 6DN7, one very linear section mu=24 and the other as CF with plate rating of 8W. ANd not too many folks looking for NOS 6DN7( going to use them in next linestage myself ). it is a cool looking valve, should give you decent power, probably 10W as it has what, a 60 W plate?
regards,
Douglas
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- See Fatbottle - Sector-7G 07:48:29 09/26/02 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
