|
Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
|
|
Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
In Reply to: Re: Aronov 9100 - Replacement RCA Jacks? posted by AlexC on April 8, 2001 at 13:13:47:
Alex, the 9.5 mm mountings will be the insulator bushing size and should fit perfectly. The Vampire is a good connector. Look at the insulation in relation to Ground shell to being on center. The cheap ones will be off center. Do not turn and pull when removing interconnects. The center pin may rotate on the OE jacks!!! Happened on my Aronov. Damn near twisted the soldered wire off. I do not like locking RCA's. They wreak havoc on old or poorly made jacks. I have the tendency to overtorque locking RCA's and the damage is done when trying to loosen for removal. Get a step drill to enlarge hole if its not a "D" cut. Put cotton with hair spray on it to catch drill shavings. The WBT is a killer design and if not a problem to install I would use them. My PY-100 has 26 single RCA jacks.
Char...
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Aronov 9100 - Replacement RCA Jacks? - Char 16:16:35 04/08/01 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
