![]() |
Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
I have a Scott 222c, and I need to replace all but 3 of the driver tubes(the're Telefunken but the numbers are worn off).
The sticker on the bottom say the tubes should be 7189, 6U8/6GH8, and 12AX7.
What tubes should I use? I was looking at JAN tubes, because they often cost less, and seem to be more relible
Do I have to match the power tube to the Telefunkens, or will it be ok to use any 7189?
I read an older post here, about using the 5751 inplace of the 12AX7 with better results, depending on the amp. Does anyone know anything about using the 5751 on this amp?
This post is made possible by the generous support of people like you and our sponsors:
Topic - tubes on a budget for scott 222c? - Atom 11:56:17 12/12/00 (19)
- Re: tubes on a budget for scott 222c? - Allan Songer 15:11:42 12/12/00 (5)
- Re: tubes on a budget for scott 222c? - Atom 07:29:25 12/13/00 (2)
- Re: tubes on a budget for scott 222c? - Paul 20:30:03 12/13/00 (0)
- Re: tubes on a budget for scott 222c? - Paul 20:26:45 12/13/00 (0)
- Re: tubes on a budget for scott 222c? - Atom 07:18:38 12/13/00 (1)
- Here - funkwrench 09:35:45 12/13/00 (0)
- Re: tubes on a budget for scott 222c? - funkwrench 12:27:19 12/12/00 (12)
- one more question - Atom 10:16:37 12/14/00 (10)
- yes. - funkwrench 19:37:38 12/14/00 (8)
- Re: Don't screw around - funkwrench 20:26:05 12/14/00 (7)
- Re: Don't screw around - Atom 08:25:28 12/15/00 (6)
- Re: Don't screw around - funkwrench 09:32:42 12/15/00 (5)
- Re: Don't screw around - Atom 11:30:29 12/16/00 (4)
- Re: Don't screw around - funkwrench 00:37:05 12/17/00 (3)
- Re: Don't screw around - Atom 12:26:03 12/17/00 (2)
- Re: Don't screw around - Paul 18:20:06 12/17/00 (1)
- Thanks everybody - Atom 09:22:52 12/20/00 (0)
- Dont screw around, get 7189 only...........(nt) - will 10:26:18 12/14/00 (0)
- Re: tubes on a budget for scott 222c? - Paul 21:03:16 12/12/00 (0)