Home Tubes Asylum

Questions about tubes and gear that glows. FAQ

RE: my bias is running away on one side even with the bias backed all the way off on that side!

Thank you, TubularWell.
I was wondering, myself, if it was the bias pot, as normally when the bias pot is backed all the way off, it needs quite a bit of screwing in until you start to see current coming up on the multi-meter. (As it is, very shortly after I turn the amp on, with the pot backed all the way out, current starts coming up & & rising in a hurry.)

I was going to try a call to Cary after 1PM today & go from there.
Thanks again!


7-5-2019 "Our army manned the air, it rammed the ramparts, it took over the airports, it did everything it had to do, and at Fort McHenry, under the rockets' red glare, it had nothing but victory."


This post is made possible by the generous support of people like you and our sponsors:
  Western Glow Tube Service  


Follow Ups Full Thread
Follow Ups
  • RE: my bias is running away on one side even with the bias backed all the way off on that side! - immatthewj 09:23:21 07/23/20 (0)

FAQ

Post a Message!

Forgot Password?
Moniker (Username):
Password (Optional):
  Remember my Moniker & Password  (What's this?)    Eat Me
E-Mail (Optional):
Subject:
Message:   (Posts are subject to Content Rules)
Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:  Automagically notify you when someone responds.