Home Tubes Asylum

Questions about tubes and gear that glows. FAQ

RE: Not according to the Eico schematic

I was just in there yesterday, but maybe i did not remember the filament circuit going from the rectifier to other tubes. Anyway it was mostly a mental exercise as it turns out. I have pretty much nixed that idea.
The schematic does have errors in it and frequently EICO would make running changes to the circuit without updating the schematic. For example, on my copy of the owner manual the filament circuit is biased with positive dcv from the last tap of the B+ supply. the 2 resistors used are 100k and 27k But it appears that the schematic has the 27k as the dropping resistor and 100k to ground. This, is opposite to what it should be, but if you check the schematic one would think that is how the resistors are labelled. thanks for the support, Dak


This post is made possible by the generous support of people like you and our sponsors:
  Sonic Craft  


Follow Ups Full Thread
Follow Ups

FAQ

Post a Message!

Forgot Password?
Moniker (Username):
Password (Optional):
  Remember my Moniker & Password  (What's this?)    Eat Me
E-Mail (Optional):
Subject:
Message:   (Posts are subject to Content Rules)
Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:  Automagically notify you when someone responds.