Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
In Reply to: Question about tube clearance in shelves posted by NuWave on January 18, 2017 at 20:50:08:
Good Morning, Nuwave:
Three other things you can try aside form what's already been suggested.
1. Being that it looks like the top two shelves have some adjustability you can try moving the shelves lower and place the amp on the top shelf and the Meridian & Marantz on the lower two shelves instead as this may provide more room for ventilation.
2. Drill two holes in the insides of each of the vertical sides of the cabinet of the same size and depth (like the ones already there) to allow the shelf with the Marantz and the Meridian to be adjusted upwards (even though the clearance above these two components would be lessened. Hoepfully these two components do not need as much ventilation space to operate without overheating?
3. Replace the shelf with the Marantz with thinner shelf?
Sincerely,
Kingsley.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Question about tube clearance in shelves - audiobasic2000 08:57:35 01/19/17 (4)
- RE: Question about tube clearance in shelves - NuWave 10:27:55 01/19/17 (3)
- RE: Question about tube clearance in shelves - audiobasic2000 11:21:45 01/19/17 (0)
- RE: Question about tube clearance in shelves - sony6060 10:44:07 01/19/17 (1)
- RE: Question about tube clearance in shelves.. Agree - Mechans 14:03:59 01/21/17 (0)