Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
In Reply to: RE: May I destroy the player if I use a wrong tube? Not if you are going from OB2 to OB2. posted by akolegov on December 26, 2016 at 14:28:48:
I hope to try a new OC2 tube soon... >>
You mean 0B2. Don't use a different voltage.
There are 2 ways to use this kind of voltage regulator
1. Dropper resistor before it. Value must be correct and this is covered in datasheets
2. DN2540 type regulator before it set for 17mA plus whatever the tubes after it draw
One other thing - you can't use capacitors after these regulator tubes. The most you can use is .068uF in parallel with the tube between B+ and ground.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: May I destroy the player if I use a wrong tube? Not if you are going from OB2 to OB2. - andy evans 02:03:15 12/27/16 (1)
- RE: May I destroy the player if I use a wrong tube? Not if you are going from OB2 to OB2. - akolegov 02:55:09 12/27/16 (0)