Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
In Reply to: re: still trying to track down a hum... posted by mr9iron on September 15, 2012 at 10:11:35:
Chris, Tre,
bummer, I tried the set up exactly as you guys described with new high quality coax cable, still same exact result, no change.. I ran a solid 12 gauge wire connecting the grounds of the RCA plugs and then from the center of that wire to the signal ground, no change, still hums. I also tried grounding them separately, and not at all, still all the same result..
could the loop be coming from somewhere on the board? It seems like I have exhausted everything on the RCA end...
thanks for your suggestions, much appreciated..
Jeff
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- re: still trying to track down a hum... - mr9iron 02:05:33 09/16/12 (3)
- re: still trying to track down a hum... - Tre' 13:46:52 09/18/12 (2)
- re: still trying to track down a hum... - mr9iron 14:08:34 09/18/12 (1)
- re: still trying to track down a hum... - Tre' 11:01:54 09/19/12 (0)