RE: I'd check the anode plate voltage and idle bias

Tubes Asylum

Questions about tubes and gear that glows. FAQ

Posted by dean_martin (A) on April 25, 2012 at 09:01:14

In Reply to: I'd check the anode plate voltage and idle bias posted by FenderLover on April 24, 2012 at 17:22:30:

Thank you for the info. Unfortunately, I wouldn't know where to begin so I will find a tech. I'm about an hour away from an independent guitar shop that might have someone who can help. The closest Guitar Center to me doesn't service amps.

I'll keep your info and I believe a schematic is still inside the amp frame. BTW, do you have recommendations for replacement power tubes? Most of my tube swapping has been done on my stereo equipment.

This post is made possible by the generous support of people like you and our sponsors:

Follow Ups Full Thread

Topic - Ping: Fenderlover re early 70s Princeton Reverb - dean_martin 15:05:38 04/24/12 (11)

Thanks for the info, guys . . . - dean_martin 14:10:17 04/26/12 (1)

RE: Thanks for the info, guys . . . - FenderLover 03:56:27 04/27/12 (0)

RE: Ping: Fenderlover re early 70s Princeton Reverb - jarebjr 10:54:46 04/25/12 (1)

Granger Amps - dean_martin 13:52:59 04/25/12 (0)

RE: Ping: Fenderlover re early 70s Princeton Reverb - FenderLover 15:10:59 04/24/12 (6)

Yep. You're right . . . - dean_martin 16:00:24 04/24/12 (5)

I'd check the anode plate voltage and idle bias - FenderLover 17:22:30 04/24/12 (4)

RE: I'd check the anode plate voltage and idle bias - dean_martin 09:01:14 04/25/12 (3)

Any good NOS US made 6V6GTA will be good - FenderLover 14:17:52 04/25/12 (2)

One other note... - FenderLover 19:36:21 04/25/12 (1)

RE: One other note... - Jareb 03:55:02 04/26/12 (0)

Follow Ups

RE: I'd check the anode plate voltage and idle bias - dean_martin 09:01:14 04/25/12 (3)

Any good NOS US made 6V6GTA will be good - FenderLover 14:17:52 04/25/12 (2)

One other note... - FenderLover 19:36:21 04/25/12 (1)

RE: One other note... - Jareb 03:55:02 04/26/12 (0)

Post a Message!