Home Tubes Asylum

Questions about tubes and gear that glows. FAQ

RE: Scott 233 tube recomendations

198.8.32.65

I have a 299D with the same tube setup. I restored it using JJ power caps and Dayton bypass caps. They were the budget end of it. The RCA 6u8's are what I have and you should not ever have to replace them. My 7591's are JJ's and they are not bad if you dont over drive them. I also did the 270k resistor. The 12ax7's I use Telefunkins on the pre amp part and I roll the phono ones between JJ and old RCA's. The JJ's in the pre stage were a bit tinny sounding. After 3 years there seems to be a hum developing. I will have to recheck my work and see where that is coming from. Maybe the JJ7591's are near the end of life. The 5ar4 is a sovtek. This is a strong tube and has held up for 2+ years. I had a JJ in there and it didnt last but 3 months and shorted. Otherwise, this is a good heavy amp for the wattage and easy to work on.


This post is made possible by the generous support of people like you and our sponsors:
  Sonic Craft  


Follow Ups Full Thread
Follow Ups
  • RE: Scott 233 tube recomendations - BEAL73 08:55:11 06/27/08 (0)

FAQ

Post a Message!

Forgot Password?
Moniker (Username):
Password (Optional):
  Remember my Moniker & Password  (What's this?)    Eat Me
E-Mail (Optional):
Subject:
Message:   (Posts are subject to Content Rules)
Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:  Automagically notify you when someone responds.