Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
In Reply to: GE 6CA7 - Can't bias tube low enough posted by Capt. Z on April 12, 2007 at 04:56:47:
Hi:
Are these the large bottle 6CA7's, about the size of a 6L6GC or larger?If so, and the amp was designed for the skinny bottle 6CA7/EL34 type, that might explain it.
The large bottle type needs more negative bias then the EL34. In some amps, you can change a resistor in the bias circuit to change the operating range of the bias adjustment.
Hope this helps! Al
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: GE 6CA7 - Can't bias tube low enough - Alpha Al 15:30:00 04/12/07 (3)
- Re: GE 6CA7 - Can't bias tube low enough - Jim McShane 06:25:19 04/13/07 (1)
- Re: GE 6CA7 - Can't bias tube low enough - Alpha Al 20:33:38 04/14/07 (0)
- Re: GE 6CA7 - Can't bias tube low enough - Capt. Z 15:36:16 04/12/07 (0)