|
Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
|
|
Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
In Reply to: Tube gurus i need your help on this posted by chgolatin2@yahoo.com on April 4, 2007 at 22:41:23:
It is all together possible that the Brimar you have is a Mullard made tube . Brimar did make some of it's own however later ones were almost all Mullard which was owned by Phillips. The way to know is to look for the acid etch code a very small alphanumeric code that does not wash off. If it is a Mullard it will generally be kind of dirty grey and have a B for the Blackburn plant and an H for the Mitcham (don't ask I don't know). The code is usually found towards on end or other but can be seen anywhere. Use a magnifying glass and do a search an AA serach Mullard codes.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Tube gurus i need your help on this - Mechans 03:57:15 04/05/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
