|
Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
|
|
Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
In Reply to: Not so fast.... posted by JoeKool on February 22, 2007 at 22:58:15:
Strange as that sounds:)For the most part the standard American glass fuses were either 32VAC or 250VAC. But for the 5 by 20mm fuses the voltage rating depends upon the current rating. For example the popular GMA series are rated at 250VAC through 3 amps and 125VAC from 3.15 to 15 amps. There are of course exceptions like the AGA series which are 125VAC until 5 amps and then are 32VAC rated.
Russ
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- You are both right - Russ57 04:54:55 02/23/07 (1)
- Thank you, Russ. - Poindexter 07:46:26 02/23/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
