Fuse question

Tubes Asylum

Questions about tubes and gear that glows. FAQ

198.147.38.125

I have an asian made tube amp. I live in usa. Back of amp says only use a 250 volt fuse. Should I be using a 250 volt fuse or ignore this as it was modified to run on 110 volts. would it make a difference if i used a 250 volt fuse as long as i used the proper amperage.

This post is made possible by the generous support of people like you and our sponsors:

Kimber Kable

Topic - Fuse question - jboat1 17:29:44 02/22/07 (6)

You will be fine with a 125 volt fuse (nt) - lipmanl 07:35:44 02/23/07 (0)

Re: Fuse question - Poindexter 17:39:05 02/22/07 (4)

Not so fast.... - JoeKool 22:58:15 02/22/07 (3)

Not actual factual - Ron Oehlert 11:00:15 02/23/07 (0)

You are both right - Russ57 04:54:55 02/23/07 (1)

Thank you, Russ. - Poindexter 07:46:26 02/23/07 (0)

You can not post to an archived thread.