Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
In Reply to: How to measure the load of output of an AMP? posted by yac70 on February 15, 2007 at 02:36:46:
To figure this out you need to look inside the amp and find the wires for the other taps. Since you have 4, 8 and 16 ohm taps there should be 4 wires including the common. Use an ohmmeter and measure the resistance between the 4 wires. The 16 ohm tap will have the highest resistance. The 4 ohm tap is a center tap and will measure the same to the common and 16 ohm tap. The 8 ohm tap will be in between the 4 and 16 ohm taps.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: How to measure the load of output of an AMP? - beermanpete@socal.rr.com 20:29:30 02/15/07 (0)