|
Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
|
|
Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
In Reply to: Aha! Great info!! I will get the primary L at lowest Hz from.... posted by radiance on July 25, 2006 at 11:56:39:
I think the russian 6d22s is still being made. Or you can go with the old 6c*3 family. These diodes are very rugged and I don't think the low DCR transformer nor a decent sized cap will cause them to break a sweat. If you go choke input then your current spikes are eliminated and are not a concern. These are single diodes so you will need a pair....but they have a low enough impedance and high enough current rating that you don't need to double up on them. Watch the tube sockets needed as they aren't the normal types!
Russ
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Consider damper diodes - Russ57 12:19:35 07/25/06 (3)
- Agree, they are rugged, cheap, have low impedance... - JimL 19:51:29 07/25/06 (1)
- very cool. and since i like to use a separate filament tx than the plate voltage.... - radiance 00:51:53 07/26/06 (0)
- cool, will do in an hour or so, after immediate dragon slain. (nt) - radiance 12:23:24 07/25/06 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]