|
Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
|
|
Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
In Reply to: McIntosh C2200 passthru operation....help posted by Lemoco on March 26, 2006 at 15:30:17:
I'm going to answer my own question for the benefit of others.The McIntosh C2200 has a home theater passthru, but it does not have a human switchable interface. It can only be activated by a DC trigger.
There is a mini-jack on the back of the unit labeled "passthru" which is where the trigger from your digital processor plugs into, and activates the passthru mode. My problem was that my AV receiver does not have an outgoing trigger to plug into the Mac. The Solution is to buy a 120v AC to 12v DC wal-wart transformer from Radio Shack, plug it into the switched 120v
outlet on the back of the AV receiver and the 12v output into the passthru input on the back of the Mac.It does work like a charm. Just be careful that you get a 1/8 mini-jack with the correct geometry - there are several, and the others don't work
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: McIntosh C2200 passthru operation....help - Lemoco 21:39:24 03/31/06 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
