|
Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
|
|
Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
I recently bought a quad of CV 4060 to try them in place of KT88. B+ = 360 V, self boias with cathode at 30 volts.
I have lowered the G2 voltage to 270V via a 18K resistor for both tubes. The bias became about 65ma even at such low G2.
So far I am only trying on 1 ch, so can't say how the sound is like execpt a bit hard still perhaps due to new tube.
Just wonder how others find and if any one tried G2 above the 300V limit..tks and best rgds
William Lee
This post is made possible by the generous support of people like you and our sponsors:
Topic - CV4060 in place of KT88 - wlee 21:06:20 08/24/05 (7)
- Re: CV4060 in place of KT88 - fatbottle 08:46:24 08/25/05 (6)
- is G2 limit at 300V a real problem? Re: CV4060 in place of KT88 - wlee 01:25:09 08/26/05 (4)
- Re: is G2 limit at 300V a real problem? Re: CV4060 in place of KT88 - fatbottle 04:04:27 08/26/05 (3)
- Re: is G2 limit at 300V a real problem? Re: CV4060 in place of KT88 - wlee 04:59:29 08/26/05 (2)
- Re: is G2 limit at 300V a real problem? Re: CV4060 in place of KT88 - fatbottle 08:58:09 08/27/05 (1)
- Re: is G2 limit at 300V a real problem? Re: CV4060 in place of KT88 - wlee 12:43:15 08/27/05 (0)
- Re: CV4060 in place of KT88 - wlee 20:28:14 08/25/05 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
