Follow Ups Full Thread

Topic - WE300B tests good, but produces no music - Norm 20:20:18 06/11/05 (15)

• I just checked continuity between pins on a good WE300b and the bad tube - Norm 09:02:20 06/12/05 (5)
• Re: I just checked continuity between pins on a good WE300b and the bad tube - dberning 04:56:42 06/13/05 (1)
• How do you do the "touching?" - Norm 07:51:46 06/13/05 (0)
• Re: I just checked continuity between pins on a good WE300b and the bad tube - MIchael Samra 15:45:37 06/12/05 (1)
• This was in a box of tubes from an estate - Norm 17:11:19 06/12/05 (0)
• Actually, I mispoke. There is very little resistance between the gird and filament pins. nt - Norm 09:03:56 06/12/05 (0)
• Re: Is the tube lighting in the amp? - MIchael Samra 07:45:48 06/12/05 (1)
• Yes, the filaments are lit. - Norm 08:20:01 06/12/05 (0)
• Re: WE300B tests good, but produces no music - Jimmy 07:37:42 06/12/05 (1)
• Sorry, I did all of that and should have said so in my post. It is the tube. nt - Norm 08:21:13 06/12/05 (0)
• Re: WE300B tests good, but produces no music - MIchael Samra 06:33:36 06/12/05 (2)
• I tried it on both sides of the stereo amp and also did wiggle it somewhat. nt - Norm 06:38:42 06/12/05 (1)
• Re: I tried it on both sides of the stereo amp and also did wiggle it somewhat. nt - MIchael Samra 07:43:51 06/12/05 (0)
• Re: WE300B tests good, but produces no music - steven oda 20:27:04 06/11/05 (1)
• Re: WE300B tests good, but produces no music - Norm 06:36:52 06/12/05 (0)

Follow Ups

• Re: WE300B tests good, but produces no music - steven oda 20:27:04 06/11/05 (1)
• Re: WE300B tests good, but produces no music - Norm 06:36:52 06/12/05 (0)