Home Tubes Asylum

Questions about tubes and gear that glows. FAQ

Questionable

Hello ,
There must be far better ways of modifying these amps , what does this mod sound like ? 47k loads on the concertina , driving 0.1uF caps into 100k grid stoppers , with output stage strapped as triodes ? What comes to mind is a subjective rolloff at both the frequency extremes . I have played around with concertinas quite a bit and valves such as 12AT7/12AU7 and 12AX7 just don't cut it , low Ra valves such as 5687 / ECC99 / 6H30 are far superior sonically and with the measured results . Fair enough using a 12AT7 front end (not really a fave of mine) but it's not really a suitable valve for concertina usage , I would imagine a 10kHz square wave would look almost like a sine wave . $60 could be better pressed into service with a 6GK5 or better still 6072 input stage and 12B4A concertina or a 6EM7 rather than a 12AT7 . Better still Allen Wright's PP1C cascode driver stage , superb sounding , stable , with tons of gain .

cheers


...FB


This post is made possible by the generous support of people like you and our sponsors:
  Schiit Audio  


Follow Ups Full Thread
Follow Ups


You can not post to an archived thread.