Valve PP amps more tolerant of under 8ohm speakers?

Tubes Asylum

Questions about tubes and gear that glows. FAQ

I am building an 8ohm output 15W PP valve amp, and am gathering from the posts here it is more important to have a fully stable 8ohm speaker load with SE and OTL valve amps - are PP valve amps slightly more tolerant of a less stable load?
I have speakers pretty close to 7ohms with a zobel network on the bass driver.
Cheers.

This post is made possible by the generous support of people like you and our sponsors:

Sonic Craft

Topic - Valve PP amps more tolerant of under 8ohm speakers? - SiDog 15:51:26 09/01/03 (4)

Re: Valve PP amps more tolerant of under 8ohm speakers? - zarniwoop 13:58:29 09/02/03 (0)

Re: Valve PP amps more tolerant of under 8ohm speakers? - pp man 23:47:10 09/01/03 (0)

Re: Valve PP amps more tolerant of under 8ohm speakers? - Tiny Daddy 19:32:58 09/01/03 (1)

The real source impedance is relevant (not the nominal one) - mb-de 05:21:38 09/02/03 (0)

You can not post to an archived thread.