|
Speaker Asylum General speaker questions for audio and home theater. |
|
|
|
Speaker Asylum General speaker questions for audio and home theater. |
|
In Reply to: refoaming Infinity speakers posted by justrob on January 5, 2002 at 02:43:41:
I reconed speakers for over 20 years. No way to insure proper voice coil centering when re-foaming without putting shims between the center pole piece and the voice coil.
You can remove the piece your reference but depending on the glue and amount used it may be next to impossible without damaging the v.c.
If this happens then your up for a complete recone.
Also - Depending on how long you used your speakers with rotted foam you may need a recone anyway. If the v.c. was rubbing the magnet for any length of time you could have damaged the voice coil.
Be sure to glue both caps back in place. Many times this heavy sub-dustcap is actually just put there to adjust the mass of the cone assembly which is tuned to the speaker enclosure.
Good Luck
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: refoaming Infinity speakers - LAROOSTER 04:43:01 01/05/02 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]