Re: Kids fingers.....

Speaker Asylum

General speaker questions for audio and home theater.

In Reply to: Kids fingers..... posted by beckers on September 18, 2001 at 13:31:04:

If the sticky stuff or the vacuum ideas fail, then try this:
Take small diameter sewing pin, and bend the first 1/16" or so into an L shape (down by the point). Carefully force the point through the dome and then pull gently on the shank to pull the dent out. You may have to do this in several places to restore the shape. Once you have the shape restored, you will have several small holes to repair. Clear nail poilish or polyurethane varnish can be used to seal the holes. Just a tiny dot is enough.
I have used this repair on several finger-poked domes with very good results.

This post is made possible by the generous support of people like you and our sponsors:

Kimber Kable

Follow Ups Full Thread

Topic - Kids fingers..... - beckers 13:31:04 09/18/01 (5)

Re: Kids fingers..... - Bald Iggle 18:36:30 09/20/01 (0)

Re: Kids fingers..... - beckers 12:03:07 09/20/01 (0)

try some blutak to pull on the - snkby 15:20:39 09/18/01 (0)

Re: Kids fingers..... - Cut-Throat 14:25:40 09/18/01 (0)

Re: Kids fingers..... - Recordfan 13:49:38 09/18/01 (0)

Follow Ups

Re: Kids fingers..... - Bald Iggle 18:36:30 09/20/01 (0)

You can not post to an archived thread.