In Reply to: RE: Trade In the Sawzall for a Heatgun posted by Valveboy on April 5, 2021 at 12:09:30:
Yes, if you gingerly heat (not burn!)the outer perimeter of the crossover cut out on the back of the speaker, the glue on the opposite side will soften enough to insert a thin bladed putty knife between the cabinet and crossover board (work from the rear first then inside if needed) you should be able to safely pry it off.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Trade In the Sawzall for a Heatgun - jaynemo 06:42:59 04/06/21 (3)
- RE: Trade In the Sawzall for a Heatgun - stereo5 10:36:07 04/06/21 (1)
- RE: Trade In the Sawzall for a Heatgun - Valveboy 10:48:29 04/06/21 (0)
- RE: Trade In the Sawzall for a Heatgun - Valveboy 06:58:43 04/06/21 (0)