|
Speaker Asylum General speaker questions for audio and home theater. |
|
|
|
Speaker Asylum General speaker questions for audio and home theater. |
|
In Reply to: No EQ there. posted by Kal Rubinson on October 9, 2016 at 13:38:19:
Kal is right, but....1. Show me a single sub without an EQ and I'll show you a sub that's set too low. :)
2. The two miniDSP units he listed are plate amps + EQ. If you have a powered sub you just want an EQ. I'm enclosing the links to miniDSP directly, but you'll also need a way to measure and calibrate them.
3. If you just want a set-n-forget solution, take a look at the DiracLive solutions from miniDSP. You will need to get a mic, and run through it's process, but you don't need to think. :)
Otherwise you'll need some way to measure the sub, and set it. For this do some reading on Room EQ Wizard or buy OmniMic. Several of the units from miniDSP are available through Madisound but Madisound will ship from the US while miniDSP ships from overseas.
Edits: 10/09/16
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: No EQ there. - erik_sq 14:06:26 10/09/16 (2)
- thanks. - Kal Rubinson 14:30:39 10/09/16 (1)
- RE: thanks. - erik_sq 14:35:08 10/09/16 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
