|
Speaker Asylum General speaker questions for audio and home theater. |
|
|
|
Speaker Asylum General speaker questions for audio and home theater. |
|
In Reply to: RE: Setting up sub levels posted by audio1025 on February 24, 2012 at 19:14:29:
See page 32 in the Parasound manual and follow the instructions. Where you and I spoke of LFE, we should be using Parasound's term LPF. Also, since you cannot vary Parasound's 80Hz filter, I suggest trying the setting for your main speakers as LARGE and as SMALL. With the former, only the dedicated LFE signal will go to the sub while with the latter, all low bass is rerouted to the sub. Thus, the sub will be out of the system for stereo sources if you set it to LARGE. See what works best in your situation.
If you have surround speakers, set them to SMALL and follow Parasound's instructions for setting channel levels and delays on page 33.
Kal
This post is made possible by the generous support of people like you and our sponsors:
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
