Speaker Asylum General speaker questions for audio and home theater.

---

[ Follow Ups ] Thread: [ Display  All  Email ] [ Speaker Asylum ]

---

[ Alert Moderator ] [ Edit ] [ Delete ]

---

Infinity P362 or JBL Stadium

131.107.0.102

Posted by tanb on April 16, 2007 at 17:21:23

I'm trying to decide between the following speakers. Any recommendations or feedback on either of these would be appreciated.

Thanks.

Infinity P362:

General
Frequency Response (±3dB) 38Hz - 20kHz
Recommended Power Amplifier Range 10 - 200 watts
Sensitivity (2.83V @ 1m) 93dB
Nominal Impedance 8 ohms
Crossover Frequency(ies) 350Hz, 3,300Hz; 24dB/octave
Low-Frequency Driver Dual 6-1/2" (165mm) MMD®
Midrange Driver 4" (100mm) MMD®
High-Frequency Driver 3/4" (19mm) MMD®
Dimensions
(H x W x D) 39-1/4" x 8-1/4" x 13"
(997mm x 208mm x 330mm)
Weight 48.5 lb (22kg)
Finish Black Wood-Grain Enclosure

or

JBL Stadium

General
Maximum Recommended Amplifier Power 225 Watts
Power Handling (Continuous/Peak) 110/440 Watts
Impedance 8 Ohms nominal
Sensitivity (2.83V/1m) 91dB
Frequency Response (–3dB) 36Hz – 20kHz
Crossover Frequencies 300Hz, 4000Hz
High-Frequency Transducer 3/4" (19mm) Titanium-laminate dome, shielded
Midrange Transducer 4" (100mm) PolyPlasâ„¢, shielded
Low-Frequency Transducers Dual 8" (200mm) PolyPlasâ„¢, shielded
Dimensions
(H x W x D) 40-1/4" x 9-7/8" x 15-3/4"
(1022mm x 251mm x 400mm)
Weight per Speaker 43.5 lb (19.8kg)

This post is made possible by the generous support of people like you and our sponsors:

Amplified Parts

---

[ Top of Page ] [ Contact Us ] [ Support/Wish List ] [ Copyright © 2024, Audio Asylum, all rights reserved ]

---

[ General ] [ Speakers ] [ Tubes ] [ Vinyl ] [ Digital ] [ Hi-Rez ] [ Video Asylum ] [ Cables ] [ Tweaks/DIY ] [ Music ] [ Films ]

---