In Reply to: Subwoofer X-Over Question posted by Steve W. on April 11, 2007 at 17:04:31:
Hi Steve,Looking at the Paradigm website, there is no info on whether the Speaker level Satellite output is filtered.
It mentions the "Subwoofer cut-off frequency" as Variable 50hz to 150hz. It appears that it does NOT filter the speaker level satellite output.
There R several ways one could check. One is with a DVM as djk suggested, another is to connect your main speakers thru the sub and turn down the sub all the way. If U still get the same low frequency info from your main speakers vs. when they R connected directly to your amp, then the sub is not filtering the satellites.
U could also pull the amp from the rear panel and have a look-see.
U could send an e-mail to their Technical Support at the following address: techsup@paradigm.com
I could not find a phone number for Paradigm anywhere so I guess a call is out.
Cheers,
~kenster
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Subwoofer X-Over Question - kenster 22:44:06 04/11/07 (0)