In Reply to: Subwoofer X-Over Question posted by Steve W. on April 11, 2007 at 17:04:31:
You can use your ohm meter to find out for sure.Measure for continuity from the sub input to the sat output terminals. If you have continuity then there is no filter.
If you have no continuity then I recommend opening up the sub and adding a 10uF film cap across the electrolytic used for the crossover.
Alternately you can just run an external filter and use good parts.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Ohm Meter - djk 18:36:25 04/11/07 (2)
- Re: Ohm Meter - Steve W. 19:29:01 04/11/07 (1)
- Re: Ohm Meter - djk 18:44:45 04/12/07 (0)