In Reply to: Re: Ohms? posted by vanillaice_378@hotmail.com on April 2, 2007 at 09:26:16:
Yes,you could use just one 4 ohm resistor,but it only has a 10 watt power rating...Since average power levels are generally considerably lower than peak,it may be all you need.If you play something loud with lots of bass,however,you may need a bit more.
Using five 20 ohm resistors in parallel will give you 4 ohms,with a 50 watt rating.Or you could use four 16 ohm resistors for a 40 watt rating.Or two 8 ohm resistors for a 20 watt rating.
I wouldn't rely on the thermal overloads on the amp to protect it.Better safe than sorry...At 98 cents per resistor,it's cheap insurance.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Ohms? - Don Bunce 22:34:26 04/04/07 (0)