Home General Asylum

General audio topics that don't fit into specific categories.

Kits, nothing scratch built

My first stereo system was built (literally) around Dynakits; the famous ST-70, a PAS-3, and a FM-3. I'd never soldered prior to that, so I practiced a bit with scrap wire. Then I inventoried everything, not just to insure all parts were there but to learn what each one was. I had physics in HS but no other electronics training. Then I carefully read every step in the instructions and checked off each one as I went. All three pieces worked. A few years later after moving close to Philadelphia I took them to the factory for a check up. They reported they only touched up a few solder connections, otherwise everything was good.

Encouraged by that I latter build a HK Citation 12 amp, Dyna ST-400 and PAT-5, and Hafler 101 and 200. Everything worked upon completion. Even though I was only following instructions for provided parts I came away with a real sense of satisfaction. But then I'm the sort who enjoys washing their car by hand for the pride in how good it looks afterward. ;^)

"The secret of life is honesty and fair dealing, if you can fake that you've got it made." Groucho


This post is made possible by the generous support of people like you and our sponsors:
  McShane Design  


Follow Ups Full Thread
Follow Ups
  • Kits, nothing scratch built - M3 lover 07:39:18 09/07/20 (0)

FAQ

Post a Message!

Forgot Password?
Moniker (Username):
Password (Optional):
  Remember my Moniker & Password  (What's this?)    Eat Me
E-Mail (Optional):
Subject:
Message:   (Posts are subject to Content Rules)
Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:  Automagically notify you when someone responds.