In Reply to: If you're referring to the 'double insulated' designation that allows manufacturers of small posted by powermatic on August 25, 2008 at 09:34:10:
>> If you're referring to the 'double insulated' designation that allows manufacturers of small appliances, hand power tools, etc. to use a two-prong power cord, there may well be a cost issue involved, but there may also be other considerations. From what little I know of the subject (mainly observation) these devices often use a non-metallic (nylon, plastic, etc.) case as part of the 'double insulation' process, so perhaps increased RFI would be a potential drawback for audio playback electronics. Though I suppose a work-around could be found...<<
>>>>>>>>>>>>>>>>>>>>>>Actually most Cd and DVD players do not use the safety equipment ground. The AC power wiring is double insulated. The case is floating.... And the case is made of a conductive metal material to reject RFI.
A Faraday cage does not need to be grounded to reject RFI.
Also more and more manufactures of A/V equipment are going to the two wire power cord. Less ground loop hum problems and complaints.
Marantz is a good example of one.
Edits: 08/25/08 08/25/08
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: If you're referring to the 'double insulated' designation that allows manufacturers of small - jea48 11:36:39 08/25/08 (11)
- Close - Charles Hansen 21:40:33 08/26/08 (10)
- Question for you... - clio09 17:03:23 08/27/08 (7)
- RE: Question for you... - Charles Hansen 22:59:58 08/27/08 (6)
- RE: Question for you... - clio09 07:17:11 08/28/08 (5)
- This is what Charles described. - Al Sekela 14:46:04 08/28/08 (4)
- How does an unconnected wire resonate? - GGA 09:39:04 08/29/08 (1)
- Just like an antenna. - Al Sekela 16:08:42 08/29/08 (0)
- So if I wanted to "float" the grounds on my system... - clio09 07:34:08 08/29/08 (1)
- Connecting the components to a floated power strip still allows ground loops. - Al Sekela 16:17:16 08/29/08 (0)
- Thanks Charles for your response, but you left us, me, hanging. - jea48 16:58:04 08/27/08 (1)
- RE: Thanks Charles for your response, but you left us, me, hanging. - Charles Hansen 22:50:26 08/27/08 (0)